Upgrading The Software Via Usb - Samsung S32R75 Series User Manual

Upgrading the Software via USB

1 Connect a USB memory to the SERVICE port shown in the figure.
SERVICE
MINI
DP IN
HDMI
IN
DC
19V
When the screen is on, press the jog button to display the Function Key Guide. When the Function
Key Guide are displayed, press and hold the jog button down for approximately 5 seconds.
Power Off
2
When the message as shown in the following figure is displayed on the product, select
upgrade the software.
Do you want to update via USB?
Yes No
3
When the screen as shown in the following figure is displayed, select Yes.
Update now
Update from version XXXX.X to version XXXX.X?
Yes No
4
The software upgrading proceeds.
Update now
Updating product Software...
Your product will turn itself off and on again automatically
after completing update.
0%
Yes to
15