Advertisement
Step 6
: Remote Control
Remote Control Buttons and Functions
✎
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.
Turns the TV on and off.
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example,
to select channel "54-3", press "54", then press
"–" and "3".
Adjusts the volume.
Brings up the OSD.
Displays Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list, Media Play
(USB) menu, etc.
Use these buttons in Media Play (USB) and
Anynet+ (HDMI) modes.
(�: Controls recording for Samsung recorders
that have the Anynet+ feature)
POWER
SOURCE
Displays and selects the available video sources.
HDMI
Selects the HDMI mode directly.
Returns to the previous channel.
PRE-CH
MUTE
Cuts off the sound temporarily.
Changes channels.
CH LIST
MENU
Displays the channel.
MEDIA.P
FAV.CH
Display Favorite Channel Lists on the screen.
TOOLS
INFO
Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
RETURN
EXIT
Exits the menu.
A
B
C
D
S.MODE: Press to select the sound mode.
S.MODE
SLEEP
MTS
SLEEP: Automatically shuts off the TV at a preset time.
MTS: Press to choose stereo, mono or Separate Audio
P.MODE
P.SIZE
CC
Program (SAP broadcast)
P.MODE: Press to select the picture mode.
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
MEDIA.P
✎
You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.
TOOLS
Selecting a Source
POWER
RETURN
To watch a movie on your Blu-ray player or watch
A
your favorite TV show, you must select the correct
POWER
source. A source is a device, such as a Blu-ray/DVD
S.MODE
player, a cable/satellite box, antenna or a cable TV
input. Sources can be connected to your TV through
P.MODE
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the
SOURCE
button on your remote. Each time
you press the
SOURCE
button, you change to a different source.
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
MEDIA.P
1. With the power on, press the
MENU
button
on your remote. The main menu appears. The
TOOLS
menu's left side has the following menu options:
MEDIA.P
Picture, Sound, Channel, Setup, Input, Application and Support.
TOOLS
2. Press the ▲ or ▼ button on your remote to select a menu option, and then
RETURN
press the ENTERE button.
A
3. When done using the menu, press the
EXIT
button on your remote to exit.
RETURN
S.MODE
P.MODE
A
Changing the Screen Size
S.MODE
Your TV has several screen size options, each designed to work best with specific
P.MODE
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIZE
button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the
P.SIZE
button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen
4:3 Standard screen
Wide Fit
Zoom 1
Zoom 2
Screen Fit
✎
Screen Fit Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
PRE-CH
MUTE
Change the channels by pressing the Channel button on the remote.
✎
If your TV is attached to a cable or satellite box, change the channel using
CH LIST
the box's remote.
MENU
FAV.CH
INFO
Changing the Picture Mode
SOURCE
EXIT
Your TV has three preset Picture Modes with factory adjusted settings, each
B
C
D
HDMI
designed to give you an excellent picture under specific conditions.
SOURCE
To change the Picture mode, press the
P.MODE
SLEEP
MTS
time you press it, your TV displays the current setting. Thereafter, each time you
HDMI
P.SIZE
CC
press the P.MODE button, you change the mode of the picture on the screen.
The Picture Modes are listed and described in the table below:
Mode
Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
PRE-CH
sunny room.
MUTE
Standard
For a bright, detailed picture in a normally lit room.
PRE-CH
For a studio quality cinema picture in a dimly lit or dark room.
Movie
CH LIST
MUTE
MENU
To change the Picture Mode, follow these steps:
FAV.CH
1. With the TV on, press the
TOOLS
button on your remote. The Tools menu
CH LIST
INFO
appears.
MENU
FAV.CH
2. Using the ▲ or ▼ on your remote, select Picture Mode.
INFO
3. On the Picture Mode menu, use the ◄ or ► on your remote to select the
EXIT
Picture Mode you want.
B
C
D
4. Press the
EXIT
button to exit the menu.
EXIT
SLEEP
MTS
B
P.SIZE
C
D
CC
Setting the Clock
SLEEP
MTS
Before you can use your TV's On/Off Timer, you must set the clock. To set the
P.SIZE
CC
clock, follow these steps:
1. Turn on your TV, press the
MENU
button on your remote, then select Setup →
Time.
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
x
If you select Auto, set the current time automatically using the time from
digital broadcast.
x
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
4. Press the
RETURN
button on your remote when done.
Connecting a USB Device for Media Play
Once you have confirmed
MediaPlay
your TV is connected to
your network. You can
Videos
play pictures, music and
videos saved on your PC
or on your TV through a
network connection in
the Media Play mode. To
begin, turn on your TV
and PC, then press the
Change Device
SUM
MEDIA.P
button on your
remote. The Media Play screen appears. For Media Play operating instructions,
please see your Owner's Manual.
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie fi les to the
jack on the side of the TV.
(HDD)
3. When USB is connected to the TV, popup window appears. Then you can
select Media Play.
button on your remote. The first
View Devices E Enter R Return
USB
Advertisement
