First use
Flushing the machine before first use
2
1
2
1
It is important that you flush the machine and milk spout before first use.
After the flushing cycle (which only takes approx. 2 minutes), the machine is
ready for brewing SENSEO
Caution: Never interrupt the flushing cycle halfway. If you do, the system
does not fill itself properly.
1 Tilt the top of the water reservoir backwards and lift the water reservoir
off the machine.
2 Fill the water reservoir to the MAX level with cold tap water.
3 Tilt the water reservoir and place the bottom back onto the machine (1).
Then press the top of the water reservoir towards the machine (2).
4 Slide the milk spout into the machine over the guiding rails on the coffee
spout. The milk spout is attached properly when you hear a click.
®
coffee.
English
9