Preparation For Use - Echo CS-352 Operator's Manual

DESCRIPTION

Preparation For Use

Saw chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar, tip guard, and
saw chain separated. Install guide bar, tip guard, and saw
chain as follows.
Instructions to Install Optional Kick Guard
Tools Needed: Two 11 mm (7/16 in.)
Wrenches.
1. Install bolt (A) in rear hole (B) of tip
guard and through front hole (C) in guide
bar.
2. IMPORTANT: Dimple (D) in tip guard
must engage recess (E) in guide bar.
3. Securely tighten nut (F) and bolt (A).
22
TM
to Bar
Optional
A
TM
Kick Guard
D
E
C
F
X7503275704
© 09/20 ECHO Incorporated
CS-352
B