Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips BTB2570 User Manual

7 Other features

Set the alarm timer

This product can be used as an alarm
clock. You can select the disc, radio, or
.mp3 files on a USB storage device as
alarm source.
Note
•
Alarm timer is not available in AUDIO IN
mode.
•
If CD/USB source is selected, but no disc is
placed or no USB device is connected, the
radio source is selected automatically.
1
Make sure that you have set the
clock correctly.
1
In standby, press and hold
» The hour digits blink.
2
Press /
hour, and then press
to confirm.
» The minute digits blink.
3
Press /
and then press
confirm.
» The last selected alarm source
blinks.
4
Press /
alarm source (disc, USB, FM or
DAB+ radio), and then press
» XX blinks (XX indicates the
volume level of alarm).
5
Press /
volume, and then press
for 2 seconds.
repeatedly to set the
to set the minute,
to select an
to confirm.
to set the alarm
to confirm.
Activate/deactivate alarm timer
In standby mode, press
repeatedly to activate or deactivate
timer.
» If timer is activated,
displayed.
•
In standby, you may press and hold
or off.

Set the sleep timer

This music system can switch to
standby automatically after a set period
of time.
• When the music system is turned
on, press
to select a set period of time (in
minutes).
» When sleep timer is activated,
To deactivate sleep timer
•
Press
until
» When sleep timer is deactivated,
to
Listen to an external
device
You can listen to an external device
through this unit with an MP3 link cable.
1
Connect an MP3 link cable (not
supplied) between:
•
•
2
Press
select
to toggle clock display on
is displayed.
(sleep off) is displayed.
disappears.
jack (3.5 mm) on the
product,
and the headphone jack on an
external device.
/
source.
is
repeatedly
repeatedly
repeatedly to
EN
15