Configuring An Existing Wireless Network Connection - Linksys CGV2W User Manual

54Mbps 802.11g Wireless LAN Card
Your newly configured network will be added under Preferred networks. Your wireless
adapter will attempt to connect preferred networks in the order in which they appear in the list.
You can change the order of preferred network by selecting the network that you want to
move and clicking the Move up or Move down button.
Note that in the Preferred networks list, an Ad-hoc network can not be moved to a higher
position than an Infrastructure network. If you want to connect to Ad Hoc network only, see
"Specifying a Network Type to Access" for instructions.

Configuring an Existing Wireless Network Connection

On the Wireless Networks tab, if your target network appears under the Available networks
or Preferred networks list but you cannot connect to it, you may want to review or
reconfigure the settings. If this is the case, just select your target network and then click
Configure (for Available networks) or Properties (for Preferred networks) to open the
properties window. Then configure the settings as needed.
20