Cobra microTALK PR560 Owner's Manual page 7

Mode Funnctions
Operation
To Set the Sensitivity:
Mode Button
1. Press the Mode button until the VOX icon
flashes and the current sensitivity level is
displayed.
VOX Sensitivity Level
The current sensitivity level is displayed
with letters "LE" and a number 1 through
5, with 5 being the most sensitive level
and 1 being the least sensitive level.
Channel Button
2. Press the Channel Up or Channel Down button
to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter the selected
setting and proceed to other functions.
b. Press the Lock button to enter the selected
setting and return to Standby Mode.
Channel Scan
Your microTALK ® radio can automatically scan channels.
To Scan Channels:
Mode Button
1. Press the Mode button until the Scan icon and
the channel numbers flash on the display.
2. Press the Channel Up or Channel Down button
Scan Channels to begin scanning channels.
The radio ignores specific privacy codes
while scanning channels.
Channel Button
The Scan icon will continue to be displayed when
scan is On. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel
for ten (10) seconds.
While setting channel scan, if you do not press
any buttons for fifteen (15) seconds your radio
will automatically return to Standby Mode on the
channel or channel/privacy code displayed before
you entered Mode Functions.
English
8
Introduction
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that channel.
Your radio will remain on that channel and return to Standby
Mode.
b. Press the Channel Up or Channel Down button to resume
scanning channels.
If you press the Talk button while scanning and not within ten (10)
seconds of receiving a transmission, you will transmit on the channel
on which you last received a transmission. This will return the radio to
Standby Mode.
If you do not press any button within ten (10) seconds, your radio will
automatically resume scanning channels.
During Scanning (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the channel or
channel/privacy code that was displayed before you entered Mode
Functions or the channel on which, during scanning, you last
•
received a transmission. This will return the radio to Standby
Mode.
b. Press the Mode button to proceed to set privacy code scan on the
channel that was either displayed before you entered Mode
Functions or on which, during channel scanning, you last received
a transmission (see
c. Press the Lock button to return to Standby Mode on the
channel/privacy code that was displayed before you entered Mode
Functions or the channel on which, during scanning, you last
transmitted or received.
Operation Customer Assistance
page 10 for further details).
Nothing comes close to a Cobra
Warranty
® 9