Table of Contents
Advertisement
12
www.electrolux.com
3.7 Preparation and assembly of the cupboard door
The dimensions of the cupboard door should be:
•
width min. 595 - max. 598 mm;
•
thickness 16-22 mm.
Before proceeding with appliance building in,
bring it near the recess and preposition the
inlet hose, the drain hose and the mains
cable.
WARNING!
Make sure they are not kinked
or squashed.
Factory pre setting
The appliance is originally pre set for the
assembly of a cupboard door opening from
right to left.
The best solution would be to
screw the upper hinge to the
upper hole of the top plate
and the lower hinge to the
lower hole of the bottom plate.
Reversibility of the cupboard door
Carry out the cupboard door reversibility
before the appliance is built in completely.
Advertisement
Table of Contents
