setting up your side-by-side
refrigerator
sEtting uP thE rEfrigErator Doors
If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors.
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by
turning the three screws counter-clockwise.
Separating the Water Supply Line from the Refrigerator
1. Remove two water lines(gray one is for ice and the other one is for water)by pressing the
coupler
:
Reattaching the Water Supply Line
1. Water line must be fully inserted to the marked line to prevent water leakage and water
dripping of water dispenser.
2. Insert the 2 clips in the install pack and check that each clip holds the line firmly.
Do not cut the water line. Gently separate it from the coupler.
DA99-01745T(EN)-GGH-0.4.indd
and pulling the water line
1
line
Coupler
clip A
(6.35mm)
Coupler
11
away.
2
Be careful that the
1
water tube match same
color.
2
line
Coupler
clip A
(6.35mm)
Coupler
setting up _11
2010.12.16
10:20:15 AM