Basic Features
■ Equalizer
Adjusts the sound mode.
– Balance L/R: Adjusts the balance between the right
and left speaker.
– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
– Reset: Resets the equalizer to its default settings.
Sound Systems, Etc.
¦
O
MENUm → Sound → ENTERE
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver / Home theatre.
■ Audio Format: You can select the Digital Audio output
(SPDIF) format.
✎
The available Digital Audio output (SPDIF) format
may differ depending on the input source.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Speaker Settings
■ Speaker Select (External Speaker / TV Speaker): A
sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External
Speaker, the volume and
operate and the sound settings will be limited.
✎
When Speaker Select is set to External
Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be
mute.
MUTE
buttons will not
■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
System Menu
Setting the Time
¦
O
MENUm → System → ENTERE
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
INFO
button.
✎
If you disconnect the power cord, you have to set
the clock again.
– Clock: Set the Day, Month, Year, Hour and Minute.
✎
You can set the month, day, year, hour and
minute directly by pressing the number buttons
on the remote control.
Using the Sleep Timer
t
■ Sleep Timer
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel Sleep Timer, select Off.
: Automatically
SLEEP
English
27