6-2
Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
S19A200NW
STATE
Power Indicator
Power Consumption
S22A200B
STATE
Power Indicator
Power Consumption
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
More Information
NORMAL OPERATION
On
20 watts
NORMAL OPERATION
On
25 watts
POWER SAVING MODE
Blinking
Less than
0.3 watts
POWER SAVING MODE
Blinking
Less than
0.3 watts
POWER OFF
EPA/ENERGY 2000
Off
Less than
0.3 watts
POWER OFF
EPA/ENERGY 2000
Off
Less than
0.3 watts
6-2