Table of Contents
Advertisement
6. Slide the new optical drive into the drive bay from the front of the computer until the optical drive
snaps into position.
Figure 17. Installing the optical drive
7. Connect the signal cable and the power cable to the new optical drive.
Figure 18. Connecting the optical drive
8. Reinstall the front bezel. See "Replacing the front bezel" on page 56.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 76.
Replacing the coin-cell battery
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii .
.
Chapter 7
Installing or replacing hardware
63
Advertisement
Table of Contents
