Table of Contents
Advertisement
5. Grasp the card that is currently installed and gently pull it out of the slot.
Figure 12. Removing the PCI/PCI-Express card
Notes:
• The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
• If the card is held in place by a retaining latch, press the card retaining latch
the latch. Grasp the card and gently pull it out of the slot.
6. Install the new PCI/PCI-Express card into the appropriate PCI/PCI-Express card slot on the system
board. See "Parts on the system board" on page 6 .
Note: If you are installing a PCI Express x16 graphics card, ensure that the memory slot retaining clips
are closed before you install the graphics card.
1
as shown to disengage
.
Chapter 7
Installing or replacing hardware
59
Advertisement
Table of Contents
