Samsung YP-GI1CW User Manual page 84

›
Add a Wi-Fi AP manually
1
In Idle mode, open the application list and select
Wireless and network
→
network.
2
Enter the SSID for the network and select the security
type.
3
Set the security settings depending on the selected
security type.
4
Save.
Select
›
Connect to a Wi-Fi AP using a Wi-Fi Protected
Setup (WPS)
Using WPS, you can connect to a secured network. To connect
to a Wi-Fi AP with a WPS button,
1
In Idle mode, open the application list and select
→ Wireless and network
2
WPS button connection.
Select
3
Press a WPS button on the access point within 2 minutes.
To connect to a Wi-Fi AP with a WPS PIN,
1
In Idle mode, open the application list and select
→ Wireless and network
2
Select a network indicated as Secured with WEP and select
WPS PIN.
3
On the access point, enter the PIN and press the start
button.
Wi-Fi settings
→
→ Wi-Fi settings.
→ Wi-Fi settings.
Connectivity
84
Settings
Add Wi-Fi
→
Settings
Settings