Tv Virtual Surround Settings (Tvs) - Sony DVP-NS360 Operating Instructions Manual

Table of Contents

Advertisement

Checking the audio signal
format
If you press
playback, the format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
Example:
Dolby Digital 5.1 ch
1 : ENGLISH DOLBY DIGITAL
Front (L/R)
+ Center
Example:
Dolby Digital 3 ch
2 : SPANISH DOLBY DIGITAL
Front (L/R)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Notes
• If "DTS" is set to "OFF" in "AUDIO SETUP,"
the DTS track selection option will not appear on
the screen even if the disc contains DTS tracks
(page 68).
• MPEG audio signals with more than two channels
will appear as shown above (3/2.1, 2/1), but only
the Front (L) and Front (R) signals will be output
from your two front speakers.
44
(audio) repeatedly during
Rear (L/R)
3 / 2 .1
LFE (Low Frequency
Effect)
2 / 1
Rear
(Monaural)
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
This only works when playing a multichannel
Dolby audio soundtrack. Furthermore, if the
player is set up to output the signal from the
DIGITAL OUT (OPTICAL* or COAXIAL)
jack, the surround effect will only be heard
when "DOLBY DIGITAL" is set to
"D-PCM" in "AUDIO SETUP" (page 68).
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC
2
Press SUR repeatedly to select
one of the TVS sounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
* For DVP-NS585P/NS590P only
SUR

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp-ns355Dvp-ns585pDvp-ns590p

Table of Contents