Starting The Programme; Adjusting The "Ready In" Time Before The Programme Starts; Adding Laundry; Cancelling The Programme - Bosch WAN28KH8 User Manual And Installation Instructions

Table of Contents

Advertisement

en Basic operation
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/Nachlegen.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
Adjusting the "Ready in" time
before the programme starts
You can readjust the selected "Ready
in" time before the programme starts.
Press Start/Nachlegen.
1.
Press Fertig in repeatedly until the
2.
display indicates the desired
"Ready in" time.
Press Start/Nachlegen.
3.

Adding laundry

Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Press Start/Nachlegen.
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
Add or remove laundry.
2.
Close the door.
3.
Press Start/Nachlegen.
4.
34

Cancelling the programme

Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Press Start/Nachlegen.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Spülen programme.
– If the water level is high: Start
the Schleudern or Abpumpen
programme.
Remove the laundry.
3.
Resuming the programme
when the programme status
is Rinse Hold
Set the Schleudern or Abpumpen
1.
programme.
Press Start/Nachlegen.
2.

Unloading the laundry

Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Open the door.
1.

Advertisement

Table of Contents
loading

Table of Contents