Maintenance; Tilting The Sewing Machine Head - JUKI LK1903B/BSS302 Instruction Manual

V. MAINTENANCE

1. Tilting the sewing machine head

WARNING :
Tilt / raise the sewing machine head with both hands taking care not to allow your fingers to be caught in
the head.
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❶
❸
C
B
❹
❷
Remove screw ❶ , and slowly tilt the sewing machine head in
the direction of arrow.
(Caution)
1. The sewing machine has been fixed with screw ❶
at the time of delivery. Normally, use the sewing
machine in a fixed state.
2. When tilting the sewing machine, be sure to
perform the work at the position of the origin of
the button carrier.
The sewing machine head may interfere with the
button carrier.
3. Return the sewing machine head gently when
returning it to its home place.
If it is returned quickly, the base portion may be
damaged. In addition, be careful not to allow your
fingers to be caught in between portion A and the
sewing machine head.
4. When returning the sewing machine head,
move the position of button clamp unit ❷ in the
direction of C so that portion B of button clamp
unit ❷ is located on the rear side of the clamp
release arm ❹ of the button feeder. Otherwise,
button clamp jaw levers ❸ do not open at the time
of sewing. So, becareful.
5. After returning the sewing machine head, be sure
to fix the sewing machine head with screw ❶ .
16
− −