Crisper And Crisper Cover; Temperature-Controlled Drawer (On Some Models); Manual Control - KitchenAid KRFF507HBS Use & Care Manual

Crisper and Crisper Cover

The humidity level in the crisper drawers is automatically
regulated, so there is no humidity control.
To remove and replace a crisper drawer:
1. Remove the drawer by pulling it open halfway. Then, lift up on
the drawer to remove it completely.
NOTE: If you unintentionally pull open the drawer to the
drawer stop, it will lock in place and you will not be able to lift
the drawer up and out.
2. Replace a drawer by placing it on the slide rails and pushing it
back into position past the drawer stop.
Temperature-Controlled Drawer
IMPORTANT: This control sets the temperature for only this
drawer. It does not set the temperature for, or turn off cooling to
the refrigerator or freezer compartments.
The full-width, temperature-controlled drawer can be used to
store large deli trays, fresh meat, beverages or other items that
you want to store at an optimum temperature.
NOTE: Do not place leafy vegetables in the temperature
controlled drawer. The colder temperatures could damage leafy
produce.
REFRIGERATOR FEATURES
To remove the crisper(s) cover:
1. Remove crisper(s).
2. Holding the glass insert firmly with one hand, press up in
center of glass insert until it rises above the plastic frame.
Gently slide the glass insert forward to remove.
3. Lift the cover frame up and remove it.
To replace crisper(s) cover:
1. Fit back of cover frame into supports on side walls of the
refrigerator and lower the front of the cover frame into place.
2. Slide rear of glass insert into cover frame and lower front into
place.
(on some models)

Manual Control

Slide the control to the temperature setting best suited for the
items stored in the drawer.
Coldest - Fish and Meat
■
Colder - Deli and Cheese
■
Cold - Wine
■
Fish-Meat Deli-Cheese Wine
27