Fcc And Other Information - Panasonic KX-TGEA40S Installation Manual

Installation
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN or MHANDSET LOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN or MHANDSET
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
Note:
R If an error tone sounds, or if
the base unit's operating instructions.
Display language
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN a MOFFN

FCC and other information

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately shielded from external RF (radio frequency)
energy. If noise occurs, use an optional headset accessory or the speakerphone
option (if applicable) when using this phone. Consult with your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
6
TGEA40(en-en)_1112_ver011.pdf 6
,
LOCATORN again to stop, then repeat this step.
is displayed.
For assistance, please visit http://shop.panasonic.com/support
) and the charge contacts with a dry cloth and
is displayed, register the handset according to
2015/11/12 11:18:34