Advertisement
Quick Links
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
I nsta ll ati on and U ser Gui de
TH134 is an electronic six-order pilot-wire programmer that allows
separate temperature control of three zones using four programs
per day. The TH134 programmer has three pilot-wire outputs can
be connected to thermostats or controller that accept pilot-wire sig-
nals.
The TH134 programmer has a remote input to which a telephone
controller (such as Aube's CT240), a home automation system
(HAS) or an energy manager can be connected. When a signal is
received from any of these devices, TH134 forwards the order to
the heating units.
Order buttons
Mode selection button
Zone selection button
Time/day setting button
TH134
Program button
Return button
Selection button
Display
√
√
√
√
√
√
The following table shows the different means of initiating an order.
Maintain temperature at setpoint (Comfort)
Maintain temperature at setpoint minus 3,5°C (3,5k setback)
Maintain temperature at 7°C (frost protection)
Turn heating Off (Off)
Maintain temperature at setpoint minus 1°C (1k setback)
Maintain temperature at setpoint minus 2°C (2k setback)
Time
Heating modes
:Comfort mode
: Setback modes
(icon is steady in 3,5k setback;
flashes in 1k and 2k setbacks)
: Frost protection
: Off
Operating modes
- Manual mode
- Auto mode
Zone selected (the letter A
appears when all 3 zones are
selected)
Current program (applicable to
automatic mode only)
No signal
400-134-000-A
1/27/05
1/4
Advertisement
Related Manuals for Aube Technologies TH134/U
Summary of Contents for Aube Technologies TH134/U
- Page 1 Time Heating modes I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de I nsta ll ati on and U ser Gui de...
- Page 2 I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on I n sta l l a ti on...
- Page 3 Select the zone using the Zone button. (Press for 3 seconds to select all 3 zones.) Whenever an order is received via the remote input, it becomes the active order for all 3 zones. To know which orders can be initiated Select the program using the PGM button.
- Page 4 This product is guaranteed against workmanship defects for a three-year period following the initial date of purchase. During this period, AUBE Technologies Inc. will repair or replace, at our option and without charge, any defective product which has been used under normal conditions.