›
Receive data using the Bluetooth wireless
feature
1
In Idle mode, open the application list and select
Wireless and network
→
Visible.
Your device is visible to other Bluetooth devices for
specified period.
You can set the duration that your device is visible to other
Bluetooth devices by selecting Visible time-out.
2
When prompted, enter the PIN for the Bluetooth wireless
feature and select OK (if necessary).
3
Open the notifications panel and select
that you are willing to receive data from the device.
Received data is saved to the bluetooth folder.
Wi-Fi
Learn to use your device's wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and is
intended for use in all European countries. The Wi-Fi can
be operated in the EU without restriction indoors, but
cannot be operated outdoors in France.
Bluetooth settings
→
Connectivity
98
Settings
→
Accept to confirm