›
Connect to a Wi-Fi AP using a Wi-Fi Protected
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
1
In Idle mode, open the application list and select
→
Wireless and network
2
WPS button connection.
Select
3
Press a WPS button on the access point within 2 minutes.
To connect to a Wi-Fi AP with a WPS PIN,
1
In Idle mode, open the application list and select
→
Wireless and network
2
Select a network indicated by the WPS icon and select
WPS PIN.
3
On the access point, enter the PIN and press the start
button.
Wi-Fi Direct
Learn to use the Wi-Fi Direct feature to connect two devices
via a Wi-Fi network without requiring an access point.
›
Connect your device to another device
1
In Idle mode, open the application list and select
→
Wireless and network
→
Wi-Fi Direct.
2
Press [
3
Select a device and then select
When the owner of the other device accepts the
connection, the devices are connected.
Scan.
→
]
→
Wi-Fi settings.
→
Wi-Fi settings.
→
Wi-Fi Direct settings
Connect.
Connectivity
100
Settings
Settings
Settings
→
OK