Table of Contents
Advertisement
Connecting other equipment
Depending on the model, your television is fitted with 1 or 2 euroconnector
sockets
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The E XT2 socket (for models with 2 euroconnector sockets) has S-VHS inputs.
Video recorder
If you have a video recorder
... and a decoder
If your video recorder does not have a euroconnector socket (or if this is
already being used by another piece of equipment), the only possible
connection is via the aerial socket. Your video recorder is then considered a
TV channel by your TV set. You must tune into your video recorder's test
signal and assign it the channel number 0. Refer to manual store p. 5.
To reproduce the video recorder picture, press the
key (on some video
recorders, the "TV/VIDEO" or "AV" key must be pressed).
Refer to the operating instructions of your video recorder for further information on
the test signal (the video recorder must be fitted with an HF modulator).
Other equipment
(camcorder, decoder, CDV/CDI, games, satellite receiver, etc.)
For models with 2 euroconnector sockets, first connect to EXT2 equipment
producing S-VHS signals (video recorder / S-VHS or Hi-8 camcorder).
To reproduce the picture of the equipment connected
4 Press the
key to select EXT1 (and EXT2 or EXT2 Y/C: for models with
2 euroconnector sockets).
Most equipment (decoder, video recorder, etc.) carries out the switch over automatically.
13
Advertisement
Table of Contents
