Table of Contents
Advertisement
Stitch width adjustment lever
(6)
When you select a stitch, the
machine will automatically set
the recommended stitch width.
The stitch width can be
regulated by sliding the stitch
width adjustment lever.
Auto settings are easily
determined by sliding the lever.
The LED indicator next to the
lever will blink and beep 1 time to
indicate the setting is at the auto
position.
When the setting is at the auto
position, you can manually
change the width according to
your preference. Starting at the
auto position, slide the lever to
the left or right to locate each
potential adjustment. At each
manual adjustment point, the
LED will blink 3 times and beep
once.
For a narrower stitch, slide the
lever to left. For a wider stitch,
slide the lever to right. The stitch
width can be adjusted between
"0.0-7.0". Certain stitches have
limited stitch widths.
26
Advertisement
Table of Contents
