Dehumidification Operation; Monsoon Dehumidifying Mode - LG V-NET ACS PREMTA000 Installation & User Manual

OPERATION SETTING – Standard Mode
14
Dehumidification Operation
Removes moisture from the air.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the operation of the product, press the mode button on the screen.
- It moves to the operation mode selection screen.
● In operation mode selection screen, press the 'Dry' button.
- Dehumidification operation's initial fan speed is 'LOW'.
- Desired temperature setting is disabled when the dehumidifying operation.
● If you press On/Off button during the use, product operation will stop.
!
NOTE
You can effectively remove moisture and perform cooling operation at the same time if you
use this function during rainy season or when the humidity is high.

Monsoon Dehumidifying Mode

This is monsoon region-specific dehumidification function.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the operation of the product, press the mode button on the screen.
- It moves to the operation mode selection screen.
● In operation mode selection screen, press the 'M'Dry' button.
- Dehumidification operation's initial fan speed is 'LOW'.
- Desired temperature setting is disabled when the Monsoon dehumidifying operation.
● If you press On/Off button during the use, product operation will stop.
!
NOTE
Using this function in the rainy season or high humidity, you can operate simultaneously de-
humidifier and cooling mode to remove humidity effectively.
OPERATION SETTING – Standard Mode
15