Table of Contents
Advertisement
Streaks appear
Afterimages appear in blank areas
●
If, of the above symptoms, "Streaks appear," "Partially faded," or "Uneven density" appears, performing the
procedure for
Using Up Toner(P. 398) may allow you to get fine print again, for some limited time.
◼
Checking the Amount Remaining in the Toner Cartridge
You can check the amount remaining in the toner cartridge according to the following, whenever you want to. It is
recommended that you check the level before you start to print a large job.
<Device Status>
remaining in the toner cartridge
Toner Level
Displays the amount remaining in the toner cartridge. Depending on your environment, other internal parts
may reach the end of their lifetime before the toner runs out.
●
The displayed amount remaining in the toner cartridge can be used only as a guide and may differ
from the actual amount.
LINKS
Consumables(P. 443)
Maintenance
Partially faded
Uneven density
White spots appear
<Amount Remaining in Cartridge>
397
Check the amount
Advertisement
Table of Contents
