Acquire Logged Profile <CFPRFGET command>
This command acquires the profiles saved on the Memory Card. The specified file is
received by XMODEM protocol.
Important
This command can be used only when the Data Storage Unit is connected with the USB cable.
<Command format>
C F P R F G E T
Folder No.
(max. 3 digits)
Example: To acquire the profile data of file No. 11 stored in folder No. 1
C F P R F G E T
<File transfer>
The file is transferred by XMODEM (-CRC or -SUM) after READY is received. XMODEM
(-K) is not supported.
<Response format>
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
• When there is no data (file) corresponding to the specified logging No.
C R
N O F I L E
• When the Memory Card is not inserted
C R
N O
D I R
<Explanation of parameters>
Folder No.
File No.
Measurement value
ZG2-DSU User's Manual
C R
C R
0 0 1
0 1 1
Specify the folder No. with a 3-digit number.
Specify the file No. with a 3-digit number.
The acquired measurement value is returned.
File No. (max. 3 digits)
Serial Communication
63