LG MC-9246JR Owner's Manual page 27

Insert the shaft of right plate
into the shaft of motor.
To Clean ROTISSERIE &
METAL TRAY
Press START.
When cooking is completed,
After cooking hold the rotisserie bar of both side with the handle and lift up
separate the ROTISSERIE from
the food. Take care when
the right end slightly and pull out from the left end.
handling both ROTISSERIE &
NOTE:
metal tray and food stuff as it is
very hot. During cooking it is 1. The rotisserie cooking is convenient for grilling of meat and poultry.
normal for the ROTISSERIE & All the surface of the food will become even brown without overturning.
metal tray to be stained from the
2. The rotisserie cooking can be used in grill mode, convection mode and
food. Simply clean the
Persian Cook.
ROTISSERIE & metal tray with a
3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking
warm soapy water and a soft
is finished remove the rotisserie bar and store with other accessories.
cloth. If the ROTISSERIE & metal
tray remain stained after
CAUTION
washing, Utensils in hot soapy
1. DO NOT USE THE METAL TRAY AND ROTISSERIE WITH NO LOAD, IT WILL BE
water for a few minutes.
DAMAGED THE OVEN.
Do not use metal scouring pads.
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
They will scratch the surface .
3. It is recommended to remove the grease from the turntable every time before
cooking. Hot grease on the turntable may cause smoke.
Installation & Cooking
Put the shaft of left plate on the
holder of rotisserie.
The shaft of motor
27
Rotisserie
The holder of Rotisserie
Glass Tray
Metal Tray