Sharp GBOXS0072AWM1 Operation Manual page 11

! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM
LOOP socket. Position the AM loop aerial
for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
< Attaching to the wall >
Wall Screws (not supplied)
External FM aerial
! Speaker connection
Front speakers
Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+)
terminal.
Centre speaker
Connect the black wire to the CENTER (-) terminal, and the orange wire to the
CENTER (+) terminal.
Surround speakers
Connect the black wire to the SURROUND (-) terminal, and the grey wire to the SUR-
ROUND (+) terminal.
Centre speaker
Surround speaker (Right)
Front speaker (Right)
Grey
Red
Black Orange
Caution:
" If you use other speakers with impedance lower than that
specified, the unit may be damaged. Front speakers: 6
ohms Centre speaker: 6 ohms Surround speakers: 12
ohms
" Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
Web-site: www.sharp.co.uk/support
Surround speaker (Left)
Front speaker (Left)
Incorrect
Help Line: 08705 274277 (office hours)
CD-DP2400H
11