Adjusting The Levels Of The Effect Speakers; Setting The Sleep Timer - Yamaha DSP-AX1 Owner's Manual

You can adjust the volume level of each effect speaker (Center, Right Rear, Rear Center, Left Rear, Front Effect, and Subwoofer) while
listening to a music source.
Center
PARAMETER
ON SCREEN LEVEL
%
SET MENU
SLEEP TEST
%
Right Rear
Rear Center
Left Rear
Front
Subwoofer
Use this feature to automatically turn off the main unit after the amount of time you set. The Sleep Timer is useful when you plan to fall
asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected
to AC OUTLETS. The Sleep Timer can only be set using the remote control.
ON SCREEN LEVEL
%
SLEEP TEST
%

Adjusting the Levels of the Effect Speakers

Set PARAMETER/SET MENU to PARAMETER.
1 1
Press LEVEL to select the speaker(s) you want to adjust.
2
2
Each time you press this button the selected speaker changes and appears in
the front panel display only as follows: Center, Right Rear, Rear Center, Left
Rear, Front Effect Speakers, and Subwoofer
Adjust the speaker volume level using the + or – on the remote
3 3
control.
You can adjust the Center, Right Rear, Rear Center, Left Rear, Front Effect
Speakers from +10 dB to –10 dB.
You can adjust the Subwoofer from 0 dB down to –20 dB.
Notes:
• You cannot adjust the left and right speakers independently.
• When you adjust the speaker level using LEVEL, the settings you made using the
• When PARAMETER/SET MENU is set to SET MENU, you cannot adjust the

Setting the Sleep Timer

To set the Sleep Timer
PARAMETER
Select a source using INPUT SELECTOR and start playback (or
1
1
SET MENU
select a broadcast station) on the source component.
Press SLEEP repeatedly to set the amount of time before the main
2
2
unit automatically turns off.
Each time you press SLEEP, the front panel display changes as shown
below. After a few seconds the display returns to the previous indication.
SLEEP OFF + SLEEP 30 min + SLEEP 60 min+
To cancel the Sleep Timer
Press SLEEP repeatedly until "SLEEP OFF" appears in the front
1 1
panel display.
After a few seconds, the display returns to the previous indication.
Note:
• The Sleep Timer setting can also be canceled by turning off the main unit using
Dolby Surround Test and DSP Test change.
speaker level using LEVEL. However, each time you press LEVEL the current
level setting of each speaker appears. Select the speaker level you want to check
%
%
using or .
= SLEEP 120 min = SLEEP 90 min
STANDBY on the remote control (or STANDBY/ON on the front panel) or
disconnecting the AC Power Cord from the AC outlet.
63