Message List - Yamaha P-250 Owner's Manual

Message List

The messages are listed in alphabetical order.
Message Meaning
This will be displayed following the "BulkDataReceiving Voice" mes-
sage. This indicates that the P-250 finished receiving the bulk data.
Once you have verified this message, you may proceed to the next step.
Receiving bulk data has failed. Check the parameter settings and try
again.
The P-250 is receiving the voice setting bulk data while this message is
displayed. Wait until the message disappears, then proceed to the next
step.
This message confirms that in the "VoiceBulkDump" operation
(page 75), you pressed the B [–(NO)] button to cancel the operation
while data was being transmitted.
This message is displayed following the message "Executing." The P-
250's internal processing is complete. You may proceed to the next step.
This message is displayed if the file format is incorrect when you load a
performance file using the "LoadFromMem." function.
"Duplicate song name or performance file name": This message is dis-
played when you attempt to rename and save a song using the
"RenameSong" function (page 55) or a performance file using the
"RenameFile" function (page 43) if an identically-named song or per-
formance file already exists in memory. Three seconds after this mes-
sage is displayed, the P-250 displays the previous screen. Please specify
a different name.
This message prompts you to execute a file-related operation. Press the
B [+(YES)] button to proceed, or press the [EXIT] button to cancel.
The P-250 is processing the data internally. Wait until the message dis-
appears, then proceed to the next step.
The normal (factory default) settings (except for the memory file setting)
("FactorySet" on page 79) have been restored. This message also
appears if you press and hold down the C7 key and turn on the power
to the P-250 (page 79).
The normal (factory default) settings (including the memory file setting)
("FactorySet" on page 79) have been restored. This message also
appears if you press and hold down the C7 and B 6 keys and turn on the
power to the P-250 (page 79).
82
P-250