Basic Editing Flow - Yamaha P-250 Owner's Manual

Basic Editing Flow

TRACK1
SONG SELECT TOP
SONG KEYBOARD
NEW SONG SYNCHRO START
MIN MAX SONG BALANCE
MASTER VOLUME
1
Access a setting menu.
Press the desired setting button ([SONG SET-
TING], [VOICE EDIT], [MASTER EQ EDIT], [MIDI
SETTING], or [OTHER SETTING]) to access the
corresponding setting menu.
Press the [EXIT] button at any time to close the setting
menu.
2
Select the desired parameter or part.
Press the setting button, A [–]/[+], and/or C [–]/[+]
buttons repeatedly as required.
3
Set the parameter or part.
Some parameters or parts lead you to more
options. Use the B [–(NO)]/[+(YES)], C [–]/[+],
and D [–]/[+] buttons to select or set the option.
To restore the default parameter value, press the [
and [+] buttons simultaneously.
2
TRACK2 EX.TRACKS SONG FILE MIDI OUT PANEL LOCK A
START/STOP REC
SONG SETTING DOWN UP
C
SONG TEMPO
1
2, 3
–
]
3, 4
B CONTRAST G.PIANO 1 G.PIANO 2 E.PIANO1 E.PIANO2 E.PIANO3 CLAVI.
1 2 3 4 5
NO YES
ORGAN 1 ORGAN 2 STRINGS CHOIR SYNTH.PAD GUITAR
EXIT
D 9 10 11 12 13
VOICE/PERFORMANCE
3
5
4
Write, execute, or save the data.
There are three ways to respond to the messages dis-
played at this juncture.
If "Execute?-->" or "Start?-->" appears:
Press the B [+(YES)] button to display confirmation
message "Sure?-->."
To proceed, press the B [+(YES)] button again. The P-
250 displays "Executing" and writes the data. When
the operation is complete, it displays "Completed" for
three seconds, then returns to the previous screen. To
cancel the operation, press the B [–(NO)] button
instead of the B [+(YES)] button.
If the P-250 does not display the previous screen three
seconds after it displays "Completed," press the B [+
(YES)] or [EXIT] button. The P-250 then displays the
previous screen.
If "Set?-->" appears:
Press the B [+(YES)] button to execute the setting. The
P-250 displays "Executing" and saves the data.When
the operation is complete, the P-250 displays "Com-
pleted" for three seconds, then displays the previous
screen.
5
Close the parameter setting menu.
Press the [EXIT] button.
If you wish to save the parameter setting for
a particular performance file:
Press the [PERFORM.FILE] button, press the A [–]/[+]
buttons to select "Performance" on the screen, press
the C [–]/[+] or VARIATION [ † ]/[ π ] buttons to select
the destination performance, then press the B [+(YES)]
button.
Editing
1 1
HARPSI. VIBES VOICE EDIT SPLIT REVERB CHORUS PERFORMANCE MIDI SETTING
6 7 8
VARIATION MASTER EQ EDIT PERFORM. FILE OTHER SETTING
BASS XG
14 15 16 A B
1
1
61
P-250