Taking Pictures After Automatically Setting The Aperture Value And Shutter Speed (Programme Ae Mode); Exposure [Touch Ae] - Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Taking pictures after automatically setting the
aperture value and shutter speed
Recording mode:
Take pictures using automatic aperture values and shutter speed settings in accordance
with the brightness of a subject.
1
Set mode dial to [
2
Press the shutter button halfway
• If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
TZ100/TZ101
While the numeric values are displayed
(approximately 10 seconds), rotate the
rear dial to change the values using
Programme Shift
• The operation can also be performed by rotating the
control ring.
• To cancel Programme Shift, either turn off the camera
or rotate the rear dial until the Programme Shift
indication turns off.
TZ80/TZ81
While the numeric values are displayed
(approximately 10 seconds), rotate the
control dial to change the values using
Programme Shift
• The operation can also be performed by rotating the
control ring.
• To cancel Programme Shift, either turn off the camera
or rotate the control dial until the Programme Shift
indication turns off.
• Programme Shift can easily be cancelled by setting a function button to [One Push
AE]. (→108)
97
]
(→50)
(→51)
Recording mode
(Programme AE Mode)
50
250 125 60
2.8
Shutter speed
Aperture value
Programme Shift indication
p
30 15
4.0 5.6
SQW0550