Tz100/Tz101 Changing The Settings; Focus Mode; Af Mode - Panasonic Lumix DMC-TZ100 Operating Instructions Manual

Changing the settings assigned to the
TZ100/TZ101
control ring/rear dial
Recording mode:
Changes the settings assigned to the control ring/rear dial.
1
Set the menu
→
2
Use
press [MENU/SET]
3
Use
[DEFLT] [Normal]
[Zoom]
[Step Zoom]
[Exposure Comp.]
[Sensitivity]
[White Balance]

[AF Mode]

[Focus Mode]

[Drive Mode]
*
Items that can only be set to the control ring
• To return to the default setting, select [Normal].
• If you do not use the control ring, select [Not Set].
• Under [Highlight Shadow], use the control ring and rear dial.
If [Highlight Shadow] is assigned to the control ring (or rear dial), [Highlight
Shadow] will also be assigned to the rear dial (or control ring).
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
74
[Custom] → [Ring/Dial Set]
to select [ ] (control ring) or [
to select the setting and press [MENU/SET]
*
(→236)
*
(→239)
(→177)
(→179)
(→134)
(→149)
(→146, 165, 167)
(→201)
] (rear dial) and
[Photo Style] (→129)
[Filter Effect] (→131)
[Aspect Ratio] (→139)
[Highlight Shadow]
[i.Dynamic] (→142)
[i.Resolution] (→142)
[Flash] (→243)
[Flash Adjust.] (→250)
*
[OFF] [Not Set]
Basics
(→133)
SQW0550