Alfa Network AC1200 User Manual page 29

 User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.

Service Name - The service name should not be configured unless you are sure it is
necessary for your ISP. In most cases, leaving these fields blank.
Connection Type

Continuous – Continuous connection type means to setup the connection through

PPPoE protocol whenever this WLAN Broadband Router is powered on.
Connect on Demand – In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again.
Manual - You can click the Connect/Disconnect button to connect/disconnect

immediately. This mode also supports the Max Idle Time function as Connect on
Demand mode. The Internet connection can be disconnected automatically after a
specified inactivity period and re-established when you attempt to access the Internet
again.
Caution: Sometimes the connection cannot be terminated although you specify a time
to Max Idle Time because some applications are visiting the Internet continually in the
background.
Idle Time - If you want your Internet connection to be active constantly, please enter "0" in the

Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
Figure 4-9 WAN - PPPoE
- 24 -
AC1200R User's Guide