Automation Function - Yamaha 02R Owner's Manual

128 Automation
1. Press the [AUTOMIX]
button.
AUTOMIX
One of the AUTOMIX
display function screens
will appear.
Note: The 02R always
remembers the last function
visited (and the last screen of
that function) even after you
turn the power off and back
on again.
2. Press the [AUTOMIX]
button repeatedly to get
to the desired screen.
Digital Recording Console 02R User's Guide

Automation Function

The AUTOMIX display function is divided into six screens:
Main
The Main screen controls the record and playback operations. Select the
frame-per-second rate, and the timecode input. Set the initial start time
and enable the editing operations.
Memory Management
The Memory Management screen is used to name the AUTOMIX and
perform store and recall operations. You can also control the record and
playback operations from this screen.
Fader Edit
The Fader Edit screen is used to edit the fader positions and set motor
parameters. You can also control the record and playback operations from
this screen.
Event Edit (Memory)
The Event Edit (MEMORY) screen is used to edit memory events. Events
can be inserted or deleted using the timecode as a reference point.
Event Edit (CH ON)
The Event Edit (CH ON) screen is used to edit channel on/off events.
Events can be inserted or deleted using the timecode as a reference point.
Event Extract
The Event Extract screen allows you to select the channels and types of
event parameters that you want to delete over a particular time duration.
Note: You should also refer to the section "Mixing and Automation" on page 67
of the Getting Started Guide for additional tips on the operation of the 02R
automation system.