Table of Contents
Advertisement
Connections
Method 3 Connecting to Mobile Device via
Wi-Fi (Blu-ray to Mobile)
The Blu-ray to mobile function lets you view the
content your player is playing on a mobile device
or Android tablet that you have connected to the
player.
1. On the player, get the player's device name.
(Navigate to Settings > General > System
Manager > Device Name.)
2. Start Samsung Connect on the mobile device.
In the list that appears, find the player's
device name. (You may need to run Scan for
Devices.)
3. Select the player's device name. In the drop
down list that appears below it, select "TV to
mobile device" (or "BD to mobile device").
4. The mobile device displays a connecting
message. The TV displays a permission
request. Select Allow using the player's
remote.
| NOTE |
\ After you select Allow the first time, you will not
need to select Allow again unless you cancel
permission.
5. In a few moments, the content being played
by the player appears on the mobile device's
screen.
6. To stop the Blu-ray to mobile function, press
(Return) on the mobile device twice.
| NOTES |
\ Samsung Connect can be referred to as
'Blu-ray to Mobile', depending on the mobile
device model. (Supported by Samsung only.)
\ If your wireless router (Wi-Fi) uses a DFS
channel, you cannot use this function.
Contact your Internet service provider for
details.
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
The connection can be wireless or wired.
Wireless Network
Wall connection
Mobile Device
| NOTES |
\ If your wireless router supports DHCP, this
product can use a DHCP or static IP address
to connect to the wireless network.
\ Set your wireless router to Infrastructure mode.
Ad-hoc mode is not supported.
\ The product supports only the following
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/
\ Select a channel on the wireless router that
is not currently being used. If the channel
set for the wireless router is currently being
used by another device nearby, it will result in
interference and communication failure.
\ If you select the Pure High-throughput
(Greenfield) 802.11n mode and set the
Encryption type on your router to WEP, TKIP or
TKIP-AES (WPS2Mixed), the product will not
support a connection in compliance with new
Wi-Fi certification specifications.
18
English
AES), WPA2-PSK (TKIP/AES)
Router
Advertisement
Table of Contents
