Advertisement
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
10 operating system.
4. From the Lenovo website http://support.lenovo.com/docs/E22_20
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control
Panel, then double click the icon of Hardware and Sound, and then click Display.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 10
(where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)).
14. Select the "lenE22-20.inf
15. In the new window, select lenE22-20 and click Next.
16.
17. Restart the system. The system will automatically select the maximum refresh rate and
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 H.z
Getting further help
If you still can't solve your problem, please contact the Lenovo Support Center. For more
information on contacting the Support Center, please see "Service and Support" on page A-1.
Open button. Click the OK button.
.
Chapter 3. 3-6
Advertisement
