Media Playback - Panasonic SC-HC200GN-K Operating Instructions Manual

█ Disconnecting a device
1
Press [ ] to select "BLUETOOTH".
2
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
3
Press [R, T] to select "OK? YES" and then press
[OK].
Note:
A device is disconnected when you:
•
Select a different source.
•
Move the device out of the maximum range.
•
Disable the Bluetooth
®
•
Switch off the system or the device.
Link mode
You can change the link mode to suit the connection type.
Preparation
If this system is connected to a Bluetooth
disconnect it. ( above)
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [R, T] to select the mode and then press
[OK].
MODE 1 Emphasis on connectivity.
MODE 2 (default) Emphasis on sound quality.
Note:
•
Depending on the device, the playback image and sound
may not be synchronised. In this case, select "MODE 1".
•
Select "MODE 1" if the sound is interrupted.
Input level
You can change the input level setting if the sound input
level of the Bluetooth transmission is too low.
®
1
Press [PLAY MENU] repeatedly to select
"INPUT LEVEL".
2
Press [R, T] to select the level and then press
[OK].
Note:
•
The default setting is "LEVEL 0".
•
Select "LEVEL 0" if the sound is distorted.
transmission of the device.
device,
®

Media playback

The following marks indicate the availability of the feature.
: CD-R/RW in CD-DA format or with MP3 files.
CD
: USB device with MP3 files.
USB
: Bluetooth
BLUETOOTH ®
Basic playback
CD USB BLUETOOTH
Play Press [4/9].
Stop Press [8].
USB
The position is memorised.
"RESUME" is shown.
Press again to stop fully.
Pause Press [4/9].
Press again to continue playback.
Skip Press [2/3] or [5/6] to skip track.
CD USB
Press [R, T] to skip MP3 album.
Search Press and hold [2/3] or [5/6].
Note:
Depending on the Bluetooth
not work.
Viewing available information
CD USB BLUETOOTH
You can view the available information on the display
panel.
Press [DISPLAY] repeatedly.
Note:
•
Maximum characters that can be shown: Approximately 32
•
This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
•
Text data that the system does not support can show
differently.
•
Example: MP3 album and track number display.
Album
number
device.
device, some operations may
®
Track
number
7