TP-Link TL-WR845N Manual page 64

Chapter 4
PPPoEv6
• PPPoE Session
types:
• Share with PPPoEv4
session.
• Create a new Session
sessions. It is default to select this option.
• Username/Password
These fields are case-sensitive.
• Address Mode
• SLAAC
• DHCPv6
• IPv6 Address
• Default Gateway
provided by your ISP.
• MTU (in bytes)
Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your
ISP connection.
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
- The PPP session type for IPv6 connection. There are two
- The PPPoEv6 and PPPoEv4 use the same PPP
- The PPPoEv6 and PPPoEv4 use different PPP
- Enter the username and password provided by your ISP.
- The way to get the IPv6 address and prefix.
- Get the IPv6 address and prefix by router advertisement.
- Get the IPv6 address and prefix by DHCPv6.
- The IPv6 address assigned by your ISP dynamically.
- Display the default gateway in colon-hexadecimal notation
- The normal MTU (Maximum Transmission Unit) value is 1492
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server Automatically, and the
61