TP-Link TL-WR845N Manual page 63

Chapter 4
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
notation provided by your ISP.
• Secondary IPv6 DNS
hexadecimal notation provided by your ISP.
• Use the following IPv6 DNS Servers
addresses, select
IPv6 DNS and
Note:
If you get "Address not found error" when you access a web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
Static IPv6
• IPv6 Address
by your ISP.
• Default Gateway
provided by your ISP.
• MTU Size (in bytes)
most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify
the MTU. But this is rarely required, and should not be done unless you are sure
it is necessary for your ISP connection.
• Primary DNS
provided by your ISP.
• Secondary DNS
notation provided by your ISP.
- Enter the DNS IPv6 address in colon-hexadecimal
- Enter another DNS IPv6 address in colon-
Use the following IPv6 DNS Servers
Secondary IPv6 DNS
- Enter the IPv6 address in colon-hexadecimal notation provided
- Enter the default gateway in colon-hexadecimal notation
- The normal MTU (Maximum Transmission Unit) value for
- Enter the DNS IPv6 address in colon-hexadecimal notation
- Enter another DNS IPv6 address in colon-hexadecimal
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
- If your ISP gives you one or two DNS IPv6
in the corresponding fields.
Automatically, and the
and enter the Primary
60