Table of Contents
Advertisement
Chapter 13
To use the Multi-User MIMO function
Multi-User MIMO (Multiple-Input Multiple-Output) enables the router to simultaneously
send data to multiple devices, significantly enhancing the network efficiency.
1. Go to
Advanced
>
2. Select the
5GHz
wireless network.
3. Enable
Multi-User
4. Click Save.
13. 7. Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
13. 7. 1. Set the Router's PIN
Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
•
If you want to enable/disable the WPS feature, go to
Enable WPS
checkbox.
•
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
13. 7. 2. Use the WPS Wizard for Wi-Fi Connections
1. Select a setup method:
•
Push Button(Recommended): Click
press the WPS button on the client device.
•
PIN: Enter the client's PIN, and click Connect.
Wireless
>
Wireless
MIMO.
Wireless
> WPS.
Customize Your Network Settings
Settings.
System Tools
>
System Parameters
Connect
on the screen. Within two minutes,
> WPS, tick or untick the
77
Advertisement
Table of Contents
