Table of Contents
Advertisement
Chapter 13
Done!
13. 6. Specify Wireless Settings
The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
router.
To use the Smart Connect function
Smart Connect allows each of the router's wireless bands to use the same wireless
settings. The router can balance network demand and assign devices to the optimum
band.
1. Go to
Basic
> Wireless.
2. Enable
Smart
Connect.
data packets. In the example, the data are sent to the gateway
through the LAN port of Router A, so
Description:
Enter a description for this static routing entry.
5. Click OK.
6. Check the
System Routing Table
entry you've set, the static routing is set successfully.
Open a web browser on your PC. Enter the company server's IP
address to visit the company network.
Customize Your Network Settings
LAN
should be selected.
below. If you can find the
74
Advertisement
Table of Contents
