JVC KW-R600BT Instructions Manual page 21

Menu item
VOL ADJUST
(Volume adjust)
L/O MODE
(Line output
mode)
SUB. W *6
(Subwoofer)
SUB.W LPF *7
(Subwoofer low-
pass filter)
SUB.W LEVEL *7
(Subwoofer level)
HPF *7
(High-pass filter)
BEEP
(Keytouch tone)
AMP GAIN
(Amplifier gain)
SSM
AF-REG *8
NEWS-STBY *8
(News standby)
P-SEARCH *8
(Programme
search)
MONO
(Monaural mode)
IF BAND
(Intermediate
frequency band)
RADIO TIMER
*6 Displayed only when <L/O MODE> is set to <SUB.W>.
*7 Displayed only when <SUB.W> is set to <ON>.
*8 Only for FM Radio Data System stations.
Selectable setting (Initial: [XX])
-05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.)
Select if the LINE OUT (REAR) terminals on the rear panel are connected to
the rear speakers or subwoofer through an external amplifier.
SUB.W: Subwoofer
[REAR]: Rear speakers
OFF: Cancels.
[ON]: Turns on the subwoofer output.
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
00 — 08 [08]: Adjusts the subwoofer output level.
ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)
[ON]/OFF: Activates or deactivates the keypress tone.
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
For settings, page 6. (Displayed only when the source is "FM".)
For settings, page 7.
ON/[OFF]: Activates or deactivates NEWS Standby Reception. (Displayed
only when the source is "FM".) (
SEARCH ON/[SEARCH OFF]:
Activates Programme Search (if <AF-REG> is set to <AF ON> or
<AF-REG ON>) or deactivates.
Displayed only when the source is "FM".
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
For settings, page 6.
Menu operations
page 7)
ENGLISH | 21