Xerox Fax Modem 4215/MRP Operation Manual page 12

INSTALLATION
Fax printer driver
Fax printer utility
Before you begin installation
1-2
Fax Utility for Macintosh disk that contains the following files:
•
— Build Fax Driver
— Fax Printer Utility.
The following options, if installed on your printer, can increase
performance when you fax and print at the same time, or when
you send and receive complex faxes:
20 MB of RAM installed on your printer
•
A high-capacity hard drive (to allow the spooling of fax jobs).
•
When you build the fax printer driver from your LaserWriter
printer driver, a Print Dialog window is created. This window is
the tool used to send a file as a fax, or to print the file locally. A
fax button in the Print Dialog window brings up the main Fax
Destinations window, and the appropriate fax information is
added to control and manage the fax transmission.
The fax printer utility does the following:
Provides configuration support for the internal fax modem
•
option
Allows you to update your Fax Phonebook
•
Allows you to configure your printer to receive faxes and set
•
the date and time of the printer calendar/clock.
Allows you to print and clear a fax Activity Report.
•
The fax utility software is provided on the Fax Utility for
Macintosh disk, and must be installed on your hard disk.
CAUTION: Do not copy the fax utility software files directly to
your hard disk and then attempt to use the driver. You must use
the install program with the fax utility and follow the instructions
provided in this chapter.
Follow these steps before you begin the installation procedure:
1. In order to use the fax utility on a Macintosh system, you
need to set the AppleTalk Print Language to the PostScript
mode (AppleTalk) from the printer control panel.
XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE