Charging the Phone
Your phone's battery should have enough power for the
phone to turn on, find a signal, and make a few calls. Y ou
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE‐approved chargers and USB Type‐C cables. The
use of unapproved accessories could damage your phone or
cause the battery to explode.
NOTE:
To achieve fast charging, you can use the original charger and
USB Type‐C cable when charging your phone.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1.
Connect the adapter to the USB Type‐C jack.
2.
Connect the charger to a standard AC power outlet.
3.
Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try
again after charging the phone for at least 20 minutes.
Contact the customer service if you still cannot power on the
phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your phone.
To power off, press and hold the Power key to open the
6