Problem Solving Guide; Technical Problems - Miele G 4940 Operating Instructions Manual

Most minor faults in the performance of the appliance, some of which may result
from incorrect operation, can be put right without contacting the Service Depart-
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:

Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably qual-
ified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.

Technical problems

Problem
The Start indicator does
not flash after switching
the dishwasher on with
the  button.
The dishwasher stops
during a programme.
Cause and remedy
The dishwasher is not plugged in, or connected to the
mains.
 Plug the dishwasher in and connect it to the mains
supply.
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re-
place the fuse in the plug (minimum fuse rating -
see data plate).
 If the mains fuse trips again, call the Miele Service
Department.

Problem solving guide

65