Table of Contents
Advertisement
[SCREEN FIT]
[USER]
f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10).
6)
Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
7)
Press as to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i] or [1920x1200p].
8)
Press the <ENTER> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
9)
Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz] or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz] or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f The value is fixed to [60Hz] when [1280x1024p], [1400x1050p], [1440x900p] or [1600x1200p] is selected
for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than the above signals are selected for [RESOLUTION].
10) Press the <ENTER> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f The same setting of the [EDID MODE] is set to the <HDMI 1 IN> terminal and <HDMI 2 IN> terminal.
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].
f The resolution and vertical scanning frequency settings may be required on your computer or video device.
f After configuring settings, your computer or video device or the projector may be required to be restarted.
f Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or video
device.
[CLOSED CAPTION SETTING]
Set the closed caption.
Selecting the closed caption display
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3)
Press as to select [CLOSED CAPTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f When [ON] is selected, proceed to Step 5).
5)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption mode
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3)
Press as to select [MODE].
Chapter 4 Settings — [DISPLAY OPTION] menu
Changes EDID data according to the [SCREEN FORMAT] setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
(Only for NTSC, 480i YC
Closed captions are not displayed.
Closed captions are displayed.
C
input)
B
R
ENGLISH - 75
Advertisement
Table of Contents
