Update Uefi Bios; Recovery Information; Reset Your Computer; Use Advanced Options - Lenovo IdeaPad S940-14IWL User Manual

Table of Contents

Advertisement

Note: If Lenovo Vantage (software) is pre-installed on your computer, you can also enable/disable always-on
in it.

Update UEFI BIOS

When you install a new program, device driver, or hardware component, you might need to update UEFI/
BIOS.
Download and install the latest UEFI/BIOS update package by one of the following methods:
• From Lenovo Vantage:
1. Open Lenovo Vantage. See "Use Lenovo Vantage" on page 14.
2. Click System Update. In the Lenovo System Update section, click Check For Updates. The
available update packages are displayed and categorized by critical, recommended, or optional.
3. If the latest UEFI/BIOS update package is available, select the package and click Install selected.
Then, the update package will be downloaded and installed automatically.
• From the Lenovo Support Web site:
Go to
https://support.lenovo.com
instructions to download and install the latest UEFI BIOS update package.

Recovery information

This section introduces the recovery information of the Windows 10 operating system. Ensure that you read
and follow the on-screen recovery instructions. The data on your computer might be deleted during the
recovery process. To avoid data loss, make a backup copy of all the data that you want to keep.

Reset your computer

In the resetting process, you can choose to keep your files or remove them when you reinstall the operating
system.
Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings
2. In the Reset this PC section, click Get started.
3. Follow the on-screen instructions to reset your computer.

Use advanced options

Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings
2. In the Advanced startup section, click Restart now
3. Select a preferred option from the following list, and then follow the on-screen instructions.
• Restore the Windows operating system from a restore point recorded on your computer
• Restore the Windows operating system from a specific system image
• Fix problems that prevent the Windows operating system from loading
• Use the Command Prompt for advanced troubleshooting
• Change the UEFI firmware settings on your computer
• Change the startup settings of the Windows operating system
• Go back to the previous build
and select the entry for your computer. Then, follow the on-screen
Update & Security
Update & security
Recovery.
Recovery.
Troubleshoot
Advanced options.
.
Chapter 5
Configure advanced settings
27

Advertisement

Table of Contents
loading

Table of Contents