Change The Startup Sequence; Set The System Date And Time; Change Hotkey Mode; Enable/Disable Always-On - Lenovo IdeaPad S940-14IWL User Manual

F1 Displays the General Help screen.
F9 Restores to the default settings.
F10 Saves your configuration and exits.
F5 Changes to a lower value.
F6
Changes to a higher value.
Locates an item.
Selects a tab.
Esc Exits the submenu and returns to the parent menu.
Enter Enters the selected tab or submenu.

Change the startup sequence

1. Open the UEFI/BIOS setup utility.
2. Select Startup Boot. Then press Enter. The default device order list is displayed.
Note: The Boot menu is displayed if the computer cannot start from any devices or the operating
system cannot be found.
3. Set the startup sequence as desired.
4. Press F10 to save the changes and restart the computer.
To change the startup sequence temporarily:
1. Restart the computer. When the logo screen is displayed, press F12.
Note: For computers with hotkey mode enabled, press Fn + F12.
2. Select the device that you want the computer to start from and press Enter.

Set the system date and time

1. Open the UEFI/BIOS setup utility.
2. Select Date/Time and set the system date and time as desired.
3. Press F10 to save changes and exit.

Change hotkey mode

Step 1. Open the UEFI/BIOS setup utility.
Step 2. Select Configuration
Enabled.
Step 3. Select Exit

Enable/Disable always-on

For some Lenovo computers with always-on connectors, the always-on function can be enabled/disabled in
the UEFI/BIOS setup utility.
Step 1. Open the UEFI/BIOS setup utility.
Step 2. Select Configuration
Enabled.
Step 3. Select Exit
26
Lenovo IdeaPad S940-14IWL User Guide
Hotkey Mode and press Enter; change the setting to Disabled or
Exit Saving Changes.
Always On USB and press Enter; change the setting to Disabled or
Exit saving changes.